Underfloor Heating DIY

Underfloor Heating systems are special systems, providing out of sight heating under any type of floor surface: under tile, under carpet, under wood, under screed and any natural stone, slate or marble. These heating system poses no harm / damage to any of these floor surfaces nor to your budget, health or environment. The lifespan…

Underfloor Heating systems are special systems, providing out of sight heating under any type of floor surface: under tile, under carpet, under wood, under screed and any natural stone, slate or marble.

These heating system poses no harm / damage to any of these floor surfaces nor to your budget, health or environment. The lifespan durability of this heating system lasts as long as your floor. Installing underfloor heating is the BEST durable investment you can make / add to your property and lifestyle. With a clean neat installation of no more than 1 – 2mm thick under your floor surface, heat is distributed evenly through your room / s which is regulated by the sensory thermostat that you have preset for your comfort.

Underfloor heating is the most healthiest option to heat your home. It is perfect for allergy and asthma sufferers and anti air-conditioning individuals who suffer headaches and sinusitus. It is environment friendly as it does not dry the air nor produce any fumes as per wood and gas fireplaces. There is no exposure of any heated elements or flames which could cause harm. Underfloor heating is economic as heat silently rises to warm your home with no thought to cost as it is so much cheaper to run than conventional heating. Heat is spread evenly to such an amount in the room, eliminating the usual warm area / cold area, resulting in comfort through and still cost effective and pleasantly felt. Long after it has been switched off the heating system still still be felt making it a great investment. Underfloor heating systems are safe as they are installed with the thermostats that are preset by you and will never overheat and may be left on continuously. It is completely user friendly as the heating system is controlled by the isolator (on / off switch) connected to a temperature controller (thermostat). Underfloor heating is totally waterproof and is used in kitchens, bathrooms with no concern as it is earthed per SABS regulations.

Be warned: Things you need to know. Heating wires should be placed 6-7cm apart. Wires should be fluorocarbon-polymer coated and not PVC. If it is PVC, your heating system will melt for maximum of 5 years only. Heating requirements is measured per room size ensuring proper kilowatts to heat up sooner minimizing electrical consumption costs. Wires should be double insulated as per regulation. Quality materials are to be used to ensure the proper binding of heating system for future security of floor surface. Each thermostat should have its own isolator as per regulation and fitted by an approved electrician. The beauty of Underfloor heating is that it is completely hidden yet certainly felt with minimum fuss and cost to you. It is also a great energy saver as a range of latest energy saving thermostats are available.

Choosing a Room Heater to Fit Your Lifestyle in 3 Easy Steps

One of the major concerns during winters is unduly buying a room heater that is not only cost savvy but also proves to be highly efficient in creating a warm and comfortable atmosphere inside the house. Let's find out in these three easy steps, how to choose a room heater that is best for your…

One of the major concerns during winters is unduly buying a room heater that is not only cost savvy but also proves to be highly efficient in creating a warm and comfortable atmosphere inside the house. Let's find out in these three easy steps, how to choose a room heater that is best for your home, shall we?

1. Choosing a Heater on the basis of its design:

• Freestanding Portable Heaters

Their portability is what makes them stand out and once the heater is turned off, the room can still remain warm for several hours. However, it takes a bit long to heat a room although specifically the oil-filled radiator ones. Another variety of freestanding portable heaters include Ceramic heaters.

• Electric Heaters that are used in Fireplaces:

Fireplace Electric Heaters can offer a great deal of warmth for dining or seating areas along with family rooms or bedrooms and warm a room of almost 400 square ft. Along with their hearing capabilities, these heaters look classy and appealing as well. However, one needs to do a little renovation in order to install these heaters.

• Wall Heaters:

If you live in a cozy apartment or the rooms are not spacious enough then availing this option is ideal. Wall heaters are mainly fan forced convection heaters. These heaters will help you to save a lot of electricity as due to their low watt feature they consume very less electricity.

2. By Coverage Area:

When you buy a room heater, considering coverage area is very critical. How big or small is your house or room? The wattage of the heater that you buy should be in accordance with the total area of ​​the room. For example a 1500 watt heater is ideal for a room of 150 square ft. The efficiency of a room heater is determined by its power and on the basis of the size and area of ​​your room; you can invest in a heater that suits your needs the best.

3. By Form:

• Radiant Heater

Commonly seen in houses, radiant heaters are ideal for small rooms and cozy spaces. They are much safer an option and you can use it on your nightstand as it will keep you warm and comfy through the night while you sleep. The heaters also come with temperature control and automatic shut off valves and they use a type of reflectors or metal element such as glowing quartz.

• Convection Heater

These heaters are mainly used for large areas as they can effectively warm up large areas and rooms. The heating process is quite quick and can be used year long as the heating function can easily be turned off during summers and the fans can be used. Some of the models come with fan assisted and some do not so look out before buying.

10 Things to Ask Yourself When Purchasing a Gas Fireplace

Looking to purchase a gas fireplace, but do not know where to start? Here are ten questions to ask yourself before purchasing a new unit for your home: What style of gas fireplace do I want? A simple way to narrow down your list of gas fireplaces is to determine what style you prefer. Do…

Looking to purchase a gas fireplace, but do not know where to start? Here are ten questions to ask yourself before purchasing a new unit for your home:

  1. What style of gas fireplace do I want?
    A simple way to narrow down your list of gas fireplaces is to determine what style you prefer. Do you want logs, glass, or a sculpture behind the glass? Do you want it in the wall or the middle of the room? Do you prefer a traditional style and size or would you prefer a linear and nontraditional style? One of the great things about gas fireplaces is that they come in so many style variacies. Because the style selection is so wide you can easily find one that fits your design preference.
  2. How much heat does it need to produce for my needs?
    Another easy way to eliminate options from your list is to determine how much heat you need the unit to produce. The amount of heat produced is measured in BTUs, or British Thermal Units. The largest factors in determining the BTUs needed include how the room is insulated, the size of the room, and the climate in which you live. There are various BTU calculators online that can help you determine a good estimate of how much heat output you need from your unit. You can also contact your local dealer and ask them for an estimate and what units will produce the heat you need.
  3. What type of venting do I want?
    When it comes to venting there are typically three options: direct vent, B-vent, or no vent. Direct vent is most popular because it offers more safety and efficiency than other venting types. Direct vent systems use a two-part system that directs fresh air in for combustion and pushes out fumes created during combustion. B-vent systems use one pipe to remove exhaust and use the air inside the home for combustion. Gas fireplace can also be vent free. These units direct the emissions into the home, rather than outdoors, but vent free units do not require installation within a wall with a chimney so placement of the unit is more flexible than with vented units.
  4. Do I want an easy start ignition?
    Many gas units offer electronic ignition which means no pilot light is necessary. One of the largest reasons home owners choose electronic ignition is that that it can save them money each month on fuel costs.
  5. How much do I have to invest in my gas fireplace?
    Gas fireplaces require a large investment, but are often worth the cost. Because of the large variety of units you can likely find one that fits your investment budget. Lower end units may cost only a few hundred dollars while upper end units with plenty of features can cost up to eight thousand dollars or more. Installation costs will vary with location and the company you choose to go with.
  6. Do the units I am looking at have a built-in fan?
    Built in fans or blowers increase the efficiency of the unit and allow it to quickly heat the room. Fans and blowers improve air circulation and distribution. Essentially, the fan pulls the air inside the home behind the firebox. When that air is heated it is pushed out into the room.
  7. Do I want to be able to adjust the flame?
    Some units allow you to adjust the flame's height. This gives you control of how much heat your unit puts out. Adjustable flames also allow you to transform and control the ambiance within the room.
  8. Do I want my gas fireplace to have LED accent lighting?
    LED accent lighting is a feature that creates a realistic flickering effect within the unit. Accent lights are typically installed on the walls or in the floor of the unit. With accent lights your gas fireplace can be illuminated even when the flames are off.
  9. Is battery backup a feature I want?
    If you are worried about heating your home during a power outage you may want to consider purchasing a gas fireplace that offers battery backup. Battery backup will help your unit to continue to produce heat without the need for electricity.
  10. Do I want a remote control or wall thermostat for my gas fireplace?
    These features offer convenience and luxury. They allow you to control your unit while conveniently sitting across the room. Wall thermostats allow you to manually set the heat output for your fireplace.

So many options may seem overwhelming, but asking yourself these questions can help you narrow your list and better ensure you find the gas fireplace that meets your needs, budget, and wants.

How to Air Condition a Whole Town

If you think your cooling bills are expensive, imagine if you had to air condition a space big enough to fit thousands of people. The world's largest cooling units move massive amounts of thermal energy to chill vast spaces. The new World Trade Center site has one of the largest air conditioning units in the…

If you think your cooling bills are expensive, imagine if you had to air condition a space big enough to fit thousands of people. The world's largest cooling units move massive amounts of thermal energy to chill vast spaces.

The new World Trade Center site has one of the largest air conditioning units in the United States. The massive machine cools the PATH hub and 9/11 memorial by pumping water through a series of steel pipes. The system rests on water from the cool depths of the Hudson River. Approximately 30,000 gallons every minute will pour into one of five centrifugal cooling towers. Each tower weighs over 85 tons and collectively they can cool the equivalent of 700 homes worth of space. By using already chilled water from the frigid river, the cooling unit is also one of the most environmentally friendly HVAC units for its size.

In the Arab world, massive projects to air condition have long been essential to maintain regular business in the sweltering summer. Qatari developers have taken things to the extreme with an AC big enough for a city. Qatar's massive oil and gas wealth and relatively small population help make it the richest state in the world. Off the coast of Doha in the Persian Gulf, the Pearl of Qatar sits as a high watermark of opulence and extravagance in the emirate. The Pearl sits on over 1,000 acres of man-made real estate and currently has nearly 12,000 residents, a few dozen restaurants, and twice as many retail stores. The whole thing is cooled by the world's largest air conditioner. It uses 28 centrifugal chillers to cool water that is then pumped through pipes all across the development. Running that much water places a strain on the desert's resources, so the Pearl's designers built a desalination plant to help feed the city's water needs.

Qatar's neighbor, Saudi Arabia has a system to air condition that's only slightly smaller: Johnson Controls' 1.2 million square foot cooling plant. In figurative terms, it is the grandest cooling plant because it cools what Muslims believe to be the House of God. The Holy Mosque, or Al-Masjd-al-Haram, in Mecca is a massive complex with original portions of the site dating to the seventh century AD The current structure houses the Ka'aba Stone, which Muslims revere as the dwelling place of the Lord. A pilgrimage to the holy ground is a requirement of the faith, and over one million people make the trip every year during Ramadan. Some years, the scorching Arabian sun can turn the temperature up to 140 degrees. That's enough heat to smoke a roast. Thankfully for the health and safety of the pilgrims, it is cool enough to visit the site even in the heat of summer.

Regular Maintenance Reduces Heating Repair Costs

The time to think about heating repair is before the cool weather rolls in. It's easy to ignore the system that provides cozy warmth through the winter months, but regular maintenance means that HVAC systems can be kept in top condition, saving the cost of early replacement. A small time investment can pay off in…

The time to think about heating repair is before the cool weather rolls in. It's easy to ignore the system that provides cozy warmth through the winter months, but regular maintenance means that HVAC systems can be kept in top condition, saving the cost of early replacement. A small time investment can pay off in terms of longevity of equipment.

Cleaning

Most systems contain some type of filtration. Regularly checking and changing the filters, especially at the beginning of the season, can help reduce wear on HVAC equipment. If the system relies upon forced hot air, cleaning the vents and pipes is another task that should be carried out at least once a year. It may be beneficial to check with local service providers to ask about regular maintenance programs. Keeping the system and filters clean reduces indoor air pollution as well as increasing the efficiency of the system, providing a healthy environment for homeowners and their families and saving on heating repair.

Draft Checks

Primarily a problem in aging homes, drafts can add thousands each year to the cost of running an HVAC system. A regular check of windows and doors can reveal spaces that allow airflow to pull the heat out of a home. Stopping drafts is a simple fix that can pay big dividends. Most home improvement stores sell kits for sealing gaps in doorframes and windows. A simple test the homeowner can carry out themselves is performed with a coat hanger or dowel and a piece of paper. The paper is simply taped to the dowel or hanger, which acts as a handle. The paper is then held in front of window and door edges. Airflow through the cracks will make the paper move, helping to pinpoint the source of any drafts, which can then be sealed. A reputable heating repair service can also perform a check of the home, to ensure heat loss is not driving unnecessary energy costs.

Uncovering Vents

Spring and summer are the most common months for rearranging the furniture in a home. An annual inventory of the placement of furniture in relation to the vents or radiators is necessary to ensure that they are not blocked. Blocked vents can add to heating repair costs because the system has to work harder to push the air into the rooms. They also reduce the overall efficiency of the system, making it more expensive to keep the home at a comfortable temperature.

Heating repair does not have to make up a large portion of the family's overall budget. Prevention is far less costly than replacement, and a regularly cared for system lasts longer and runs more efficiently, saving on energy costs. It's important for homeowners to follow an annual schedule of checks to ensure the HVAC system is kept running efficiently for as long as possible. For home and business owners who can not or do not want to maintain their own systems, most professional services offer a maintenance program that will help keep systems running smoothly for years.

Three Reasons Why It Is Important To Call Your Air Conditioning Repair Company

Nearly two-thirds of all American homes have some form of cooling device. Last year, Americans spent over 11 billion dollars keeping their homes cool. When most people call their local HVAC shop it is because they are in trouble. Something broke and they can not keep their house at a reasonable temperature. The fact of…

Nearly two-thirds of all American homes have some form of cooling device. Last year, Americans spent over 11 billion dollars keeping their homes cool. When most people call their local HVAC shop it is because they are in trouble. Something broke and they can not keep their house at a reasonable temperature. The fact of the matter is that air conditioning repair companies should not just be called when something stops working. Here are three instances when you should consider calling your repairman.

House Is Cooling Too Slowly

If a house is not cooling down fast enough, many people will simply leave the unit running until the desired temperature is reached. In some cases, people will even lower the desired temperature with the hope that it will begin cooling faster. Unfortunately, these are both bad decisions. If a climate control unit is not functioning properly, allowing it to continue to run, or run for longer, simply puts more strain on the system. Instead of ignoring the problem, or turning the temperature even lower, you should call your air conditioning repair company. They can send a technician out to run a diagnostic check on your system. In some cases, companies can even run diagnostics checks remotely if notified of the problem. Many companies also offer free or discounted diagnoses checks.

You Receive A Surprisingly High Monthly Bill

The average American spends approximately $ 300 a year on central air utilities. Heating and cooling account for roughly 50% of monthly utilities. So if your furnace or central air is not functioning properly, you are going to notice it in your bill long before you notice it in the temperature. If you do notice a spike in your bill and can not come up with an explanation, you should call your air conditioning repair service. A quick diagnostic test can alert the company to any problems. An inexpensive repair that is causing an energy drain could be costing you big bucks every single month. High utility bills are generally the first symptom of a faulty climate control unit.

You Suffer From Allergies

One in six Americans, or over 50 million people, suffer from hay fever every year. In simple cases, a hypoallergenic air filter can help keep the pollen out of your house. In most cases, however, an off the shelf filter will not do the trick. Your local HVAC company will have plenty of experience dealing with allergies. They will know the best filters and systems to keep allergens out of your house, ensuring that you will not suffer from congestion at home.

Remember, you should not only call your local air conditioning repair company when the AC stops working. Call them if your utility bill is too high, your house is not cooling down enough, or if your allergies are kicking in and you want some suggestions on filtering the pollen. Their help can keep your climate control system running efficiently for many years to come.

Two Reasons To Call Your HVAC Company

Last year, people in the US spend over $ 25 billion to heat and cool their homes. The energy required to run climate control systems makes up the largest portion of that cost. Through the United States, nearly half of the energy spent in the average home is from climate control. For most people, the…

Last year, people in the US spend over $ 25 billion to heat and cool their homes. The energy required to run climate control systems makes up the largest portion of that cost. Through the United States, nearly half of the energy spent in the average home is from climate control. For most people, the only time they consider calling their local heating, ventilation, and air conditioning (HVAC) company is when their AC unit or furnace will not turn on. By then, it is usually too late, and they will have to pay for an expensive repair or replace the system. Here are two times when it is prudent to call your repairman for a diagnostic check or preventative care.

Your Climate Control Is Not Responding As Fast As It Used To

Everyone knows that if a house is hot or cold, it can take a little while for the HVAC system to bring the temperature to a more comfortable level. However, it is important to have an idea of ​​how long it usually takes your system to really kick in. If your AC unit or furnace is taking too long to respond, there is a good chance that it has an issue. Ignoring the problem will force the unit to work harder in an attempt to reach the set temperature. This puts a greater strain on all of the components and only exacerbates the situation. If you call your local climate control technician, they can catch any potential problems early.

Your Utility Bill Is Unusually High

It is an unfortunate fact of life that utilities are not free. Any homeowner or renter has experienced the dread of opening your utility bill during the peak months of winter or summer, depending on where you live. Having to run your furnace or air conditioning non-stop can get expensive quickly, especially if you live in an old house. Fortunately, you learn pretty quickly what your monthly bills are like, and you can probably predict, reliably closely, what it will be from month to month. If you receive a utility bill that is unusually high, do not dismiss it. Calling your HVAC technician will ensure that a broken system will not continue to hemorrhage your money. In some cases, your technician can even run a diagnostic check of your systems from his office, so a home visit is not necessary. If they have to make a visit, many companies will waive the initial check, especially if further repair is needed.

In conclusion, it is important that you do not ignore your HVAC systems. Keeping up with basic maintenance such as filter replacement and preventive repairs will save you time and money in the long run. Your climate control company can make sure that your systems are running as efficiently as possible, keeping your house at the temperature you want without wasting money.

5 Ways to Ensure Safety With Your Gas Fireplace

You've heard again and again that gas fireplaces add to the beauty and value of a home. You've probably also heard that they are efficient and a cost-effective heat source. But what you may not have heard about is the safety precautions to take with gas fireplaces. Gas fireplace injuries can happen. The glass reaches…

You've heard again and again that gas fireplaces add to the beauty and value of a home. You've probably also heard that they are efficient and a cost-effective heat source. But what you may not have heard about is the safety precautions to take with gas fireplaces.

Gas fireplace injuries can happen. The glass reaches temperatures of at least 500 ° F. Children, especially, are at risk of third degree burns when the glass is touched. Such burns are painful and take time to heal. Many leave lying scars. There is also risk of carbon monoxide poisoning.

But gas fireplaces do not have to be a cause for such alarm. When properly used and maintained, injuries are rare. There are also simple things you can do to ensure the safety of those who gather around your unit.

Here are five simple ways to ensure safety with your gas fireplace:

  1. Ensure those around the running unit know of the dangers and safety rules. The dancing flames are very appealing and many young children attempt to get closer to enjoy the view. One of the best ways to reduce the risk of injury associated with your unit is to educate those in your home. Beside teaching them to keep a good distance from the gas fireplace they should also be taught how to turn the unit on and off, to keep flammable items away, and what to do if they get burned. Also warn them that the unit, glass, and surrounding area will remain hot even after the unit is turned off. If younger children live in the home or visit often, it is important to review the rules.
  2. Purchase and use a secure safety screen. A safety screen works as a barrier to keep people, especially children, from touching the scorching glass. Because screens are in close proximity to the glass, they can also retain heat and children should be taught to not touch the safety screen. No alterations to safety screens should be permitted. Also, never move the barrier away from the unit. This reduces the chance that it may be forgotten and not replaced to its proper location.
  3. Install carbon monoxide and smoke detectors. Carbon monoxide is a poisonous gas. Because it is odorless it is hard to identify without the use of a detector. It is rare for gas fireplaces to emit carbon monoxide in the home, but it is important to have them installed. Many professionals recommend installing carbon monoxide detectors on each level of the home. To ensure detectors are working properly, change the batteries every six months. Smoke detectors should also be installed near gas appliances such as your stove or fireplace and through your home.
  4. Keep flammable items at least three feet from the firebox. Combustibles and flammable items such as decorations, lamps, couches, chairs, pillows, blankets, and curtains should all be kept at least three feet away from your unit, especially while it is in use. This will reduce the risk of fire in the home and damage to your marriages.
  5. Make and keep annual inspection appointments. Annual safety inspections performed by a licensed and certified contractor will help to guarantee your unit will run efficiently and function safely. A typical inspection typically includes:

    • Inspection and cleaning of the fan
    • Cleaning of the glass
    • Cleaning and adjustments to the logs
    • Inspection of firebox and vents
    • A thorough check for condensation
    • Monitoring of efficiency
    • Inspection of igniter, settings, and switches

Gas fireplaces are an efficient and cost-effective way to heat your home. Keeping in mind the dangers of such a unit will ensure safety and will better help you enjoy the many benefits of your gas fireplace.

Top Reasons to Purchase a Gas Fireplace

Out with the old and in with the new. That saying rings true for many things, including fireplaces. Wood units used to be a luxury most home owners wanted, but now gas fireplaces have become the new trend. And with all the benefits modern gas fireplaces provide, it is no wonder they are so popular.…

Out with the old and in with the new. That saying rings true for many things, including fireplaces. Wood units used to be a luxury most home owners wanted, but now gas fireplaces have become the new trend. And with all the benefits modern gas fireplaces provide, it is no wonder they are so popular.

If you are thinking about installing a gas unit in your home, here are a few reasons it could be an excellent investment option for your home.

  1. Goodbye to hauling logs. There are many modern devices that make wood chopping and hauling easier than methods used before. But even with the use of these devices, preparing enough wood to heat your home requires a lot of time, effort, and the money to purchase helpful devices. A gas fireplace removes the need to chop, haul, and store fire wood.
  2. They require less maintenance than with wood units. Wood units require maintenance and inspection one to three times a year to keep the chimney and catalytic combustor working properly and efficiently. However, gas fueled units require zero to little maintenance. Some units have no vent that requires cleaning and most efficient units require maintenance only once a year for safety and to keep the unit running efficiently.
  3. Many come with convenient features. Many modern units come with a remote control, energy-saving starting systems, a wall thermostat, or other features that add to the convenience of a fuel powered unit.
  4. Cost effective heating. When compared to other heating units, they are much more efficient which, in turn, saves money each month on your heating bill.
  5. Gas units can be installed just about anywhere, and in multiple rooms. Inserts and free-standing units make it easy for installation in your kitchen, bedroom, living room, bathroom, or all of the above. Because no chimney is required for vent free units they are great for multiple rooms. Vented units only require one wall so glass faces can be installed on two or three sides of the unit for a unique look.
  6. Increases the value of your home. According to the National Association of REATORS®, a fireplace that functions properly and is built with a classic mantel and design, can increase the value of your home by up to $ 12,000.
  7. Less hassle when starting up the fire. With a simple touch of a button you can begin to enjoy the warmth and serenity of a beautiful fire. Some units come with a remote control so you can relax in your favorite spot and control the power and temperature settings without having to get up.
  8. Enjoy higher efficiency than wood units. Modern units are designed to burn more efficiently than wood burning units. In fact, with a gas fireplace you can expect to get 75 to 99 percent of fuel's energy back as heat.
  9. Add a touch of art to the room with various designs and flame styles. These units add a lot of character and texture to a room. Gas fireplaces come in many different designs and styles so you can match the décor of the interior of your home.
  10. Bring warmth and peace into the home. Fires not only bring warmth to the room, they invite a peaceful and relaxing atmosphere.
  11. A better heating option for the environment. When compared to wood burning units, gas fireplaces are much more environment friendly. Vent free units are very efficient and do not release combustion by-product into the environment.
  12. Heat your home during a power outage. You never know when the power will be out and for how long. Studies have shown that in recent years the amount of outages has not changed much, but the length of time to restore power has increased. Imagine being able to stay warm and comfortable when the power goes out during a bad storm or during cold season months.

With new developments and new technology fireplaces have been able to evolve into more efficient heating devices. Whether you choose wood burning, gas, or electric, you are sure to find plenty of reasons to install a fireplace in your home.

Draw the Envy of Your Guests With a Direct Vent Gas Fireplace

A direct vent gas fireplace can add not only heat but style to your home. They provide heat similar to a traditional fireplace, without the need for cutting wood and dealing with wood chips and lugging the kindling and firewood into your home on a regular basis. They vent themselves so you do not have…

A direct vent gas fireplace can add not only heat but style to your home. They provide heat similar to a traditional fireplace, without the need for cutting wood and dealing with wood chips and lugging the kindling and firewood into your home on a regular basis. They vent themselves so you do not have to worry about smoke back up into your home.

Instead, you simply get to turn it on with the flick of a switch and enjoy the beauty of a fireplace and the confidence of knowing your home will be warm and safe and smoke-free.

People who opt for a direct vent gas fireplace know that their living room or bedroom will be warmed by the heat from the fireplace. They know they do not have to be concerned about soot building up in the chimney or issues with losing heat through that particular venting necessity (for a wood-burning fireplace, that is).

Comfort Control Systems Are a Benefit

Maintaining a constant temperature in the home can be difficult when you are trying to use a wood-burning fireplace. On the contrast, gas fireplaces can use comfort control systems, which electronically monitor the room and adjust the temperature to keep it from getting too hot or too cold. This effective use of the damper by an electronic system is a highly desirable alternative to manually adjusting it every half hour or so.

Take the More Healthy Option

While wood is a renewable resource and gas is not, the fact is that the combustion of gas releases far fewer chemicals into the atmosphere. It is a cleaner burn than the use of wood, and this makes it a better option if you are considering the overall health of the environment and atmosphere.

It Does Not Cost More

When it comes to opting for a new wood-burning fireplace or a direct vent gas fireplace, the cost is similar when you factor in the product and installation fees. That means, you do not have to go for the wood-burning fireplace to cut cost. It is also worth mentioning that by the time you factor in transport and cutting costs for wood for a winter, it is not the cheaper alternative for heating fuel.

In conclusion, you can opt for the more stylish alternative and do what is good for the environment, ensure your home can be kept at a more even temperature with the addition of a comfort control system, and you do not have to shell out significantly more money for either the installation of the product or the fuel that you will need to keep it running and your home warm during the winter months.

Choosing the stylish option does not have to mean adding a significant amount to the budget and breaking the bank. Also, factor in the long-term costs in addition to the initial amount you may or may not save, and the clear option becomes irrelevant. Enjoy your direct vent gas fireplace without any guilt after you do all the computations.

For More Info Direct vent gas fireplace

Why Residential Properties Need Professional Duct Cleaning?

Heating & cooling systems installed in homes serve the purpose of controlling the flow of air inside the homes. The ducts installed along the concessions of the place, through which air keeps circulating with the functioning of the system must be maintained. Just as regular maintenance of heating systems is essential, duct cleaning for homes…

Heating & cooling systems installed in homes serve the purpose of controlling the flow of air inside the homes. The ducts installed along the concessions of the place, through which air keeps circulating with the functioning of the system must be maintained. Just as regular maintenance of heating systems is essential, duct cleaning for homes is also significant. This is not just a general need, there are several specific reasons why unclean ducts attached to the heating systems can cause serious damage to its functioning & are hazardous for human health as well.

Impact of Dust & Dirt on the HVAC Systems

The air inside or around a house may seem clean, but may be contaminated with invisible dirt molecules which can not be seen until they are accumulated in greater amounts. Each time the system is made to run, dirty air gets circulated through the house. With twists & turns in the ducts installed & the pressure of circulation, microscopic dust flowing through gets accumulated across furnace ends, on air conditioning filters & in vents as well. Also, due to improper cleaning of ducts, along with negligence of changing AC filters, the function of the HVAC system is affected with time. This is why it is essential to opt for professional services for duct cleaning for homes.

Impact on Human Health

It's not only a generally accepted idea, but a proven study that unclean, dirty ducts can have serious implications on the human health. It has been surveyed & found by Health authorities that concentration of dust & dirt in homes is mainly because of the dirty ducts and vents in HVAC systems. The effects of dirty ducts which are not cleaned for years of continuous use can have its direct effect on the eyes, nose and lungs. People with allergies are those who suffer the most due to these filthy ducts. Similarly, there could be respiratory and skin-related problems in such an environment.

Effects of Regular Duct Cleaning

If a general analysis is done by looking into the ducts, using a light source & a camera, it can be clearly found that dirt & dust are accumulated over walls of the ducts. Choosing professionals in duct cleaning for homes for cleaning service will lead to improved airflow & unimpeded functioning of the HVAC system. These professionals utilize vacuum techniques and manual brush cleaning to clean the duct work.

As a whole, professional services of duct cleaning for homes will ensure a contaminant-free, healthy environment & problem-free functioning of the heating & cooling systems installed.

When to Call Heating Contractors to Replace an HVAC System

How does a home or business owner know when it's time to call in professional heating contractors to replace or repair a furnace or AC unit? A basic rule of thumb is to replace a furnace or AC unit at the end of its expected lifespan: about 10-15 years for an AC unit, and 15-20…

How does a home or business owner know when it's time to call in professional heating contractors to replace or repair a furnace or AC unit? A basic rule of thumb is to replace a furnace or AC unit at the end of its expected lifespan: about 10-15 years for an AC unit, and 15-20 years for a heater. These ages are relative though, and age is not the only factor in the important decision to replace an HVAC system. Qualified heating contractors can help determine the overall condition of the unit, but there are several ways for homeowners to get an idea of ​​whether replacement or repair is the best course of action.

Excessive noise

If the equipment is making a lot of noise while running, it may indicate wear in the moving parts. In an older unit, noise is a sign of parts wearing out, and that rubbing and rattling is starting to occur. It may be possible to replace the worn parts, but usually by the time the noise is noticeable, the cost of replacement parts outweighs the price of a new HVAC system. Professional heating contractors will be able to examine the equipment and determine whether replacement or repair is the more advisable option.

Diminishing Indoor Air Quality

An aging HVAC system can begin to leak, spewing dust particles into the air and reducing indoor air quality. Over time, the heat exchanger in a furnace develops holes and cracks. These cracks may release carbon monoxide into the air. It's important that carbon monoxide detectors be used whenever the system is in use, and that home and business owners are aware of any smell of exhaust. Another telltale sign is soot buildup around vents and around the furnace itself. A cracked heat exchanger should be replaced immediately by qualified heating contractors to prevent carbon monoxide poisoning.

Increasing Costs

Whether it's repair bills or energy costs, extra expenses relating to the HVAC system may be a sign the equipment needs to be replaced. Older systems become less efficient over time, driving fuel or energy costs higher. Newer units are more energy efficient, using less fuel or energy to operate, which saves money in the long run.

Upgrading Home

If the home has been recently remodeled, the existing HVAC system may not be able to keep up with the new space. When adding on to a home, or changing the layout of existing rooms, more square footage is often added. Since most builders size HVAC units to the home when it's built, the current unit may no longer be able to handle the larger space.

Home for Sale

Homeowners who plan to sell in the near future may want to consider replacing the HVAC system. Having an updated HVAC system in place makes a home more attractive to prospective buyers. New furnace and AC units are reliably modest investments that pay big dividends when it comes time to close a sale.

Home Heating Oil Is an Eco-Friendly, Economic Way to Winterize a Home

Home heating oil is the best solution for home furnaces or boilers. This method is not only environmentally friendly, but it also has a lot of money saving potential. Fuel works well all over the country, but for areas that must end harsh winters, it's a particularly effective way to cut costs during long cold…

Home heating oil is the best solution for home furnaces or boilers. This method is not only environmentally friendly, but it also has a lot of money saving potential. Fuel works well all over the country, but for areas that must end harsh winters, it's a particularly effective way to cut costs during long cold spells. It's also incredibly safe.

Earthy Goodness

Today's home heating oil surpasses even Environmental Protection Agency standards. It comes close to a zero-emissions rating. If the home heating oil contains low-sulfur and renewable biofuels made from a product such as soybeans, then consumers will be warming their cozy abodes with a fuel that is even closer to zero emissions. This product qualifies as so earth-friendly, the Federal Clean Air Act does not even regulate its emissions.

Financial Fortitude

This form of winter warming saves money because a little goes a long way. Modern systems command stellar efficiency ratings. The flame burns with such intensity, that the process requires less fuel. Furthermore, market competition means businesses keep the prices lower than in other areas of the warming industry. There are always multiple savings to be had with green warming solutions.

Safety First

This type of oil is not deadly if inhaled, which puts it far above other types of heating available on the market. Furthermore, it is safe to store because it does not explode. If someone accidentally drops a match into the oil, the flame extinguishes as if it's been dropped into water. To catch fire, the temperature must reach 140 degrees, and then it vaporizes. Another great safety feature is that these systems give off signals if there is a malfunction. There's almost always a warning if a carbon monoxide leak occurs. Some systems release smoke while some give off soot. Whatever warning is released, it happens early, well before lethal levels of carbon monoxide accumulate.

No Shortage

When switching to this method of staying cozy in a harsh winter, there's no reason to worry about supply limitations. Reserves are outstandingly plentiful, with little to no danger of depleting. Biofuel options are also significantly expanding this reserve. This is going to help keep the costs low for supplies, for delivery, and for system installations.

Longer Life

The home heating oil systems, on average, last about thirty years. When compared to the average lifespan of other leading options, oil installations last nearly twenty years longer. Units work at full capacity without needing much in the way of repairs.

Showers Soothe

When this type of system is in use, referring to a shower as “soothing” appears a bit of an understatement. The water runs warmer than water derived from other heating methods. An oil water heater operates at double the speed of a gas water heater and at triple the speed of an electric one. There's no need to dread unpleasant splashes of cold interrupting a relaxing shower ever again!

Heating Oil Warms and Preserves the Earth

Heating oil is the best way to keep a house warm. It substantially cuts energy bill costs. In terms of the ordering and delivery process, it could not be easier. This energy is also earth friendly, a fact that remains unknown to many consumers. Understanding these earth-friendly elements helps consumers see the benefits of staying…

Heating oil is the best way to keep a house warm. It substantially cuts energy bill costs. In terms of the ordering and delivery process, it could not be easier. This energy is also earth friendly, a fact that remains unknown to many consumers. Understanding these earth-friendly elements helps consumers see the benefits of staying warm with this planet-safe alternative.

Drilling and Firing Without Footprints

In 1935, the first forced-air furnaces came into existence. They allowed American homeowners control over the temperatures of their homes via the simple adjustment of thermometers. This invention revolutionized how Americans thought of comfort. Petroleum made that possible. However, as time went on, it became evident that some changes needed to be made so that comfort could not only a standard but a green standard. Since 1990, the government has empowered laws to reformulate the composition of fuel so that emissions are reduced, slashing air pollution statistics. These laws also extended the potency of fuel, which means big savings for consumers. It also means that today, reserves remain at their highest supply ever.

The Strategic Petroleum Reserve holds 727 million barrels in stock, and the Northeast Heating Oil Reserve keeps 2 million barrels in stock. These barrels boost clean and green standards, as the US does not depend on other countries for supplies. Therefore, the government can ensure what goes into the supply as well as reduce footprints caused by harmful drilling practices. Overall, the changes made since 1990 have vastly renewed heating oil and the environment.

Determining Tank Size

Residential tanks are often in-ground. In-ground tank sizes are classified as 288, 340, 420, 518, 550, 555 or 675 gallons. The tank size will be one that works for the client, assuring enough fuel to make it through cold weather economically, without wrecking havoc on the land and atmosphere. If still confused about the size of the tank that is needed, a dependent fuel service can offer advice on the selection. A simple phone call or email to clarify concerns helps assists. Communicating with the fuel company can also help consumers pick a tank that will not harm the land. A fuel company is always happy to explain how to prevent tank leaks and corrosion from rust.

Preparing Ahead of Time is The Eco-Way

Deliveries can generally be made within a few days of ordering supplies. It is good for customers to get into the habit of ordering ahead of time instead of waiting until the last minute. That way, cold weather can not invade a dwelling unexpectedly. There is also the rare possibility that the supplier may be unable to make deliveries due to bad weather, or closed roads. If that is the case, ordering ahead of time means that the heating oil is ready to use. It also prevails having to use an alternative that is not eco-friendly.

You can find out how much money it is possible to save by using an online calculator.

Refrigerant Reclamation Is A Risky But Necessary Operation

Refrigerant reclamation is the process of removing old Freon from a cooling system and reprocessing said gas to a level of purity so it can be resold. Since the Clean Air Act of 1990 the USA requires all used cooling gases to be processed by a certified reclaimer which is licensed by the US Environmental…

Refrigerant reclamation is the process of removing old Freon from a cooling system and reprocessing said gas to a level of purity so it can be resold. Since the Clean Air Act of 1990 the USA requires all used cooling gases to be processed by a certified reclaimer which is licensed by the US Environmental Protection Agency, and the gas must be recovered and delivered to a specified processing facility by EPA certified technicians.

Freon is used throughout the world and can be found in devices such as dehumidifiers, central air conditioning systems (HVAC), freezers, refrigerators, and air conditioners. When these systems need servicing, there is a risk that some gases will be released into the atmosphere. Misuse of these gases has been shown to have a detrimental effect on the ozone layer, hence the training of specifically certified technicians and the building of processing facilities to handle this coolant.

Definition

The Environmental Protection Agency defines coolant recycling as to reprocess refrigerant to at least the purity level specified in government established codes and to verify this purity using analytical methodology. What this means is used coolant must be reprocessed to exact purity levels of newly sold coolant.

This requirement protects the purity of used coolant to prevent damage to the systems that use this product. Equipment damage would result in a loss to the consumer that would result in the reduction of consumer confidence.

Dangers Of Exposure

Freon contains chemicals known as fluorinated hydrocarbons that are a near odorless, tasteless gas and when deeply inhaled may cut off oxygen to your lungs and blood cells. Limited exposure, such as breathing near an open container or a spill on your skin is only mildly harmful. However, care should be taken to avoid exposure to these types of chemicals. According to the Office of Environmental Health Hazard Assessment (OEHHA), even trace amounts can cause symptoms that include: Dizziness, headaches, irritation to the eyes, throat, and nose, and heart palpitations. Inhaling high concentrations of Freon on a regular basis can cause respiratory problems, fluid buildups in the lungs, damage to your organs, and sudden death (OEHHA, 2003).

Now that you know what it is for and how dangerous it is, you know the most logical thing for you to do if you need assistance with an appliance that uses this gas is to call a specially trained professional.

Many do not know that refrigerant reclamation and recycling as an industry was given the opportunity to create its own business solutions in order to meet these requirements. The industry responded with the startup of new companies and the expansion of existing companies to provide recovery and recycling equipment and recovery cylinders, analytical testing procedures, and the processes of disposal of unusable products.

The recycling business is now known as the collection, consolidation, processing, resale, and disposal of refrigerant that a contractor's customer can no longer use.

Refrigerant reclamation can be a dangerous job. If you need help, contact your qualified local technician today.